Integrated Pollution Prevention and Control (IPPC) Reference Document on Best Available Techniques in the Glass Manufacturing Industry

This reference document on best available techniques in the glass industry reflects an
information exchange carried out according to Article 16 (2) of Council Directive 96/61/EC. The document has to be seen in the light of the preface that describes the objective of the
document and its use. This document covers the industrial activities specified in Sections 3.3 and 3.4 of Annex 1 of Directive 96/61/EC, namely: Installations for the manufacture of glass including glass fibre with a melting capacity exceeding 20 tonnes per day. Installations for melting mineral substances including the production of mineral fibres with a melting capacity exceeding 20 tonnes per day. For the purposes of this document the industrial activities falling within these descriptions in the Directive are referred to as the glass industry, which is considered to be comprised of eight sectors. These sectors are based on the products manufactured, but inevitably there is some overlap between them. The eight sectors are: container glass; flat glass; continuous filament glass fibre; domestic glass; special glass (including water glass); mineral wool (with two sub-sectors, glass wool and stone wool.); ceramic fibre; and frits. The document is made up of seven chapters and a number of annexes containing supplementary information. The seven chapters and four annexes are:
General Information
Applied Processes and Techniques
Present Consumption and Emission Levels
Techniques to Consider in the Determination of BAT
BAT Conclusions
Emerging Techniques
Conclusions and Recommendations
Annex 1 Example installation emission data
Annex 2 Example sulphur balances
Annex 3 Monitoring
Annex 4 Member State Legislation
The objective of the executive summary is to summarise the main findings of the document. Due to the nature of the main document it is impossible to present all of its complexities and subtleties in such a short summary. Therefore, references are made to the main text and it should be stressed that only the main document in its entirety should be used as a reference in the determination of BAT for any particular installation. To base such decisions on the executive summary alone could lead to the information being taken out of context and to a misinterpretation of the complexities of the issues. Klick Downloads

Judul: Integrated Pollution Prevention and Control (IPPC) Reference Document on Best Available Techniques in the Glass Manufacturing Industry
Ditulis oleh Unknown
Rating Blog 5 dari 5